Copyright 2021 Equal Weighing System Sdn Bhd
phone
Mobile :: Subhead
R420, R423 and R427 – K491 Firmware
INK491

R420, R423 and R427 – K491 Firmware

Key Highlights & Features

  • 2 Axis tilt compensation
  • Built in RS232/RS485 ports
  • Communication Modules (RS232/RS485)
  • I/O Modules
  • Supports R400 series modules & accessories
  • Up to +/- 15 degree compensation
  • Up to 250 Products

Description

 
The K491 is a general purpose indicator that uses an accessory module to connect to a 2 axis tilt sensor that provides tilt compensation. The K491 is ideal for specialist truck OEM's requiring electronics for accurate load weighing solutions where the load may be on an angle. Both the ABS R420-K491 and stainless steel R423-K491 are ideal for panel mounting in a truck cab, featuring a large display and programmable function keys. The application is for a truck to have accurate weight readings that can compensate for uneven surfaces where a weight reading might be taken.
 
Simple calibration: Zero/Span calibration (at 0 angle) and tilt calibration to generate the four tilt parameters that are used to correct the reading.
 
Accessories: The K491 requires a tilt module and tilt sensor.
  • Tilt Module (M4211)
  • Rinstrum tilt sensor (M4) suitable for +/- 10 degree
  • The tilt sensor must be correctly mounted given the axes that are providing data
  • The K491 is compatible with a selection of the other sensors up to +/-15 degrees
 
Two IP65 housing types:
R420 (ABS) and R423 (stainless steel) each with a high impact polycarbonate lens to protect the LCD from knocks.
 
Custom printing: dockets can be customised for the application. The built in RS232/RS485 port can be configured for printing.
 
R400 Series K491 firmware is approved for trade use in Australia
"The instrument may be provided with an automatic tilt sensor/compensation device that automatically compensates for out of level conditions up to ±10° in longitudinal or transverse directions. The tilt sensor/compensation device consists of a Rinstrum model M4904 tilt sensor and model M4211 tilt compensation module. The model M4904 tilt sensor uses a HL Planar model NS 10/PL2-S dual axis compensation level sensor."

Contact Details

 
location_on Equal Weighing System Sdn Bhd
No. 22, Jalan Indah 16/11,
Taman Bukit Indah, 81200
Johor Bahru, Johor.
local_phone +607-235 8525
phone_iphone +6012-769 0951 (Mr Sani)
mail_outline info@equalweighingsystem.com
   
Copyright 2021 Equal Weighing System Sdn Bhd